Hybrid process for texturization of diamond wire sawn multicrystalline silicon solar cell

Acid texture is difficult for diamond wire sawn (DWS) multicrystalline silicon (mc‐Si) wafer owing to the inhomogeneous distribution of damage layer on the surface. In this article, metal‐assisted chemical etching (MACE) has been selected for introducing a porous seeding layer to induce acid texturing etching. SEM results show that the oval pit structures coverage get obvious improvement even on the smooth areas. Owing to the further improved light absorption ability by second MACE and nanostructure rebuilding (NSR) process, nanostructured DWS mc‐Si solar cell has exhibited a conversion efficiency of 17.96%, which is 0.45% higher than that of DWS wafer with simple acid texture process. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

P‐type tin‐oxide thin film transistors for blue‐light detection application

We reported the characteristics of p‐type tin‐oxide (SnO) thin film transistors (TFTs) upon illumination with visible light. Our p‐type TFT device using the SnO film as the active channel layer exhibits high sensitivity toward the blue‐light with a high light/dark read current ratio (I_light/I_dark) of 8.2 × 10³ at a very low driven voltage of <3 V. Since sensing of blue‐light radiation is very critical to our eyes, the proposed p‐type SnO TFTs with high sensitivity toward the blue‐light show great potential for future blue‐light detection applications.

     

Preliminary investigation into feasibility of dissolved methane measurement using cavity ringdown spectroscopy technique

For the exploration of gas hydrate resources by measuring the dissolved methane concentration in seawater, a continuous-wave cavity ringdown spectroscopy (CW-CRDS) experimental setup was constructed for trace methane detection. A current-modulation method, rather than a cavity-modulation method using an optical switch and a piezoelectric transducer, was employed to realize the cavity excitation and shutoff. Such a current-modulation method enabled the improvement of the experimental setup construction and stability, and the system size and stability are critical for a sensor to be deployed underwater. Ringdown data acquisition and processing were performed, followed by an evaluation of the experimental setup stability and sensitivity. The obtained results demonstrate that great errors are introduced when a large fitting window is selected if the analog-to-digital converter has an insufficient resolution. The ringdown spectrum of methane corresponding to the 2v ₃ band R(4) branch was captured, and the methane concentration in lab air was determined to be 2.06 ppm. Further experiments for evaluating the quantitative ability of this CW-CRDS experimental setup are underway from which a high-sensitivity methane sensor that can be combined with a degassing system is expected.     

Reentrant orbital order and the true ground state of LaSr2Mn2O7

Contrary to conventional wisdom, our purified La 2-2x Sr 1+2x Mn2O7 crystals exhibit CE-type orbital and charge order as the low-temperature ground state for a hole doping level h=0.5. For small deviations from h=0.5, the high-temperature CE phase is replaced at low temperatures by an A-type antiferromagnet without coexistence. Larger deviations result in a lack of CE order at any temperature. Thus, small inhomogeneities in cation or oxygen composition could explain why others commonly see this reentrance with coexistence.     

Geometric phase in a composite system subjected to decoherence

In this paper, we investigate the geometric phase of a composite system which is composed of two spin- particles driven by a time-varying magnetic field. Firstly, we consider the special case that only one subsystem driven by time-varying magnetic field. Using the quantum jump approach, we calculate the geometric phase associated with the adiabatic evolution of the system subjected to decoherence. The results show that the lowest order corrections to the phase in the no-jump trajectory is only quadratic in decoherence coefficient. Then, both subsystem driven by time-varying magnetic field is considered, we show that the geometric phase is related to the exchange-interaction coefficient and polar angle of the magnetic field.     

Triplet pairing states with equal spins in ferromagnet/superconductor heterojunctions for noncollinear magnetizations

Four-component Bogoliubov-de Gennes equations are applied to study tunneling conductance spectra of ferromagnet/ferromagnet/d-wave superconductor (F₁/F₂/d-wave S) tunnel junctions and to find out signs of spin-triplet pairing correlations induced in the proximity structure. The pairing correlations with equal spins arises from the novel Andreev reflection (AR), which requires at least three factors: the usual AR at the F₂/S interface, spin flip in the F₂ layer, and superconducting coherence kept up in the F₂ layer. Effects of angle α between magnetizations of the two F layers, polarizations of the F₁ and F₂ layers, the thickness of the F₂ layer, and the orientation of the d-wave S crystal on the tunneling conductance are investigated. A conversion from a zero-bias conductance dip at α = 0 to a zero-bias conductance peak at a certain value of α can be seen as a sign of generated spin-triplet correlations.     

Improved optical single-sideband generation using the self-modulation birefringence difference in semiconductor optical amplifiers

By employing the self-modulation birefringence difference in a semiconductor optical amplifier (SOA), an improved method is proposed to generate a complete optical single-sideband (OSSB) signal. Over 30 dB sideband suppression ratios (SSRs) of lower OSSB signals are obtained over a 12 dB input power range and a 36 nm wavelength span, with a maximum of over 35 dB. Upper OSSB signals with an SSR of over 15 dB are observed using a SOA for what is believed to be the first time. This method is effective even for the carrier-suppressed signal. The theory for OSSB generation in an SOA is extended and verified by experiment.     

Schematic design of a complex thin-film luminescent screen usable for vacuum fluorescent and field emission display

Based on the facts related to solid-state cathodoluminescence, mixed excitation, and serial excitation recently discovered in our laboratory, a fundamental schematic design and a series of different schematic elaborated designs are proposed for protection from electron accumulation, reasonable use of a luminescent screen, and enhancement of light intensity.     

Effect of Protective Measures on Eye Exposure to Solar Ultraviolet Radiation

In this study, ocular biologically effective exposure to solar ultraviolet radiation (UVBE) is investigated with six kinds of sun protective measures (spectacle lenses, sunglasses, cap, bonnet, straw hat and under parasol). Ocular UV exposure measurements were performed on manikins during the summer period in Shenyang city (41.64° N, 123.50° E, 66 m a.s.l.), China. The measurements include the ocular UV exposure of an unprotected eye and the ambient UV as a control concurrently. Based on the relative spectral weighting factors of the International Commission on Non‐Ionizing Radiation Protection (ICNIRP), the ocular biologically effective UV is calculated and compared with the 8‐h exposure limits of ICNIRP (30 J m^?2). The UV index (UVI) of the measurement days is 0–8, and the 8‐h (8:00–16:00 China Standard Time, CST) cumulated UVBE of the unprotected eye is 452.0 J m^?2. The 8‐h cumulated UVBE of the eye with spectacle lenses, sunglasses, cap, bonnet, straw hat and under parasol are 364.2, 69.1, 51.4, 49.0, 56.8 and 110.2 J m^?2, respectively. Importantly, it should be noted that the eye could be exposed to risk despite protective measures. The 8‐h cumulated UVBE of the eye with protection is ca 1.6–15.1 times the exposure limit, respectively. As indicated in the present study, during summer months, high exposure to the sun for more than 30 min without eye protection and more than 1 h with eye protection is not advisable. The protection measures could effectively reduce the UVBE reaching the eye, yet there is still a high degree of risk when compared with the ICNIRP 8‐h exposure limits.     

BirA*-protein A fusion protein based BioEnhancer amplifies western blot immunosignal

Western blot (protein immunoblot) is a widely used analytical technique in molecular biology. Utilizing the specific recognizing primary antibody, proteins immobilized on various matrix are investigated by subsequent visualization steps, for example, by the horse radish peroxidase conjugated secondary antibody incubation. Methods to improve the sensitivity in protein identification or quantification are appreciated by biochemists. Herein, we report a new strategy to amplify Western blot signals by constructing a probe with proximal labeling and IgG targeting abilities. The R118G mutation attenuated the biotin-AMP binding affinity of the bacterial biotin ligase BirA*, offering a proximity-dependent labeling ability, which could be used as a signal amplifier. We built a BirA*-protein A fusion protein (BioEnhancer) that specifically binds to IgG and adds biotin tags to its proximal amine groups, enhancing the immunosignal of target proteins. In our experiments, the BioEnhancer system amplified the immunosignal by tenfold compared to the standard western blot. Additionally, our strategy could couple with other signal enhancement methods to further increase the western blot sensitivity.